Meta Description:
Mobile display broken ho gaya? Janain display change karne ka easy aur safe tareeqa – complete step-by-step guide, tools, tips aur safety advice sirf aaplusmobiles.com par!
💔 Mobile Display Toot Gaya? Ghabrayein Nahi!
Aaj kal mobile ka slip hona ya screen ka toot jana aam baat hai. Lekin har technician ko pata hona chahiye ke display change karna ek fine aur delicate kaam hai – thoda sa pressure ya heat ka farq mobile ko dead bhi kar sakta hai.
Is article mein aap seekhein ge:
- Kaunse tools chahiye hote hain
- Screen replace karne ka full process
- Kya safety tips follow karni chahiyein
- Aur common mistakes jo new students ko nahi karni chahiyein
🔧 1. Required Tools & Equipment
Display change karne ke liye kuch essential tools chahiyein hote hain:
🧰 Tools List:
- LCD separator machine (ya hot air gun)
- Plastic opener tools / spudger
- Suction cup / LCD lifting tool
- Tweezer
- Screwdriver set
- Isopropyl alcohol
- B-7000 / T-7000 glue
- New display (original ya compatible)
- ESD strap (anti-static)
🛠️ 2. Display Change Ka Step-by-Step Tareeqa
🔸 Step 1: Mobile Power Off Karna
Sabse pehle mobile band karein. Agar removable battery hai to nikaal dein.
🔸 Step 2: Back Cover Aur Screws Remove Karna
Screws ko safe jagah rakhte hue back cover gently remove karein.
🔸 Step 3: Battery Connector Disconnect Karna
Short ya spark se bachne ke liye battery connector sabse pehle remove karein.
🔸 Step 4: Heat Lagakar Display Ko Naram Karna
Separator machine ya hot air gun se LCD ke kinarey 80-90°C tak heat karein.
⚠️ Tip: Zyada heat display ya motherboard ko damage kar sakti hai.
🔸 Step 5: Suction Cup Aur Opener Se Display Lift Karna
Suction cup se thoda uthayein, phir spudger se sides gently open karein.
🔸 Step 6: Display Ribbon Carefully Disconnect Karna
Old display ka flex/ribbon board se remove karein — pressure na dein.
🔸 Step 7: Glue Clean Karna & New Display Fit Karna
Old glue ko alcohol aur brush se saaf karein, phir naye display ko test kar ke glue laga ke fit karein.
🔸 Step 8: Test & Assemble
Battery connect kar ke mobile ko on karein. Agar display theek kaam kar raha hai to mobile ko dobara assemble karein.
⚠️ 3. Important Safety Tips
✔️ Battery ko hamesha pehle disconnect karein
✔️ Glass tootne par hath cut hone se bachne ke liye gloves pehnein
✔️ Jumper wires ya ICs ke pass heat na le jayein
✔️ LCD ribbon ko kabhi pull na karein – break ho sakta hai
✔️ Original ya high copy display hi use karein
❌ 4. Common Mistakes Jo Nahi Karni Chahiyein
🔹 Without testing naya display laga dena
🔹 Zyada glue use kar dena
🔹 PCB pe heat lagana
🔹 Display ko bend karna during fitting
🔹 Battery connect rehnay par display replace karna (short ka risk!)
🧠 Bonus Tip – Display Testing Board Use Karein
Market mein har brand ka display testing board available hota hai jisse aap display ko phone se pehle test kar sakte hain. Ye especially helpful hota hai jab customer display le ja raha ho.
✅ Summary
DMobile display change karna aik technical lekin seekhne laayak skill hai. Is process mein sabse pehle sahi diagnosis zaroori hai — yeh samajhna ke screen kharab hai ya flex cable ya motherboard ka issue hai. Uske baad suitable tools jaise heat gun, suction cup, plastic pry tools, aur ESD-safe environment ka use karte hue, purani screen ko carefully remove karna chahiye.
Nayi screen lagane se pehle testing karna zaroori hai taake customer ke mobile mein koi aur issue na aaye. Jab nayi screen set ho jaye toh usay sahi tarah mount karke device ko dobara assemble karna hota hai. Har step mein safety aur precision zaroori hai, warna device permanently damage bhi ho sakta hai.
Agar aap mobile repairing seekh rahe hain, toh display replacement aik must-have skill hai jo aapko job aur freelance dono mein kaam dila sakti hai. Roz aur tips ke liye visit karein: aaplusmobiles.com 📱💡
